Power Window Problems of The Car

In the beginning the power windows are available only for the luxury cars. But now a days these are available for many cars. It is looking good when the button pressed, window is moving down or moving up. But when it stuck and not working properly, Become very difficulty. If the window is stuck in the middle and the rain is started while driving will be more difficult to bare. The mechanical system in the power window and the manual operating widow are same. But the power window needs power to make it work. Generally the power window system is very complicated to brake. Very rare cases they have the problems. Now we will see them.

• Check the Fuses: If no window is working, check the circuit is receiving electricity or not. In the panel check the fuse for the circuit. If you are unable to find the location check your owner's manual. The fuse can test with multimeter ohms settings. And then test main control to ensure the power is receiving. It has twelve volts direct current. If the problem is not in the main control, look for the broken wire which is going to the control panel. If the windows are working occasionally the problem might be in the wiring.

• Problems with motors: Window motors can fail because of the old or aged. When a motor is receiving power or voltage but not working means it is failed. So the motor has to be replaced. Accessing the motor area is difficult. You can purchase new motor for that. Follow the instructions to install the motor, if anything given. The weather sheeting in the door may not stick back in place. Which is located between the door panel and the mechanisms. Electrical tape or duct tape can use to hold the plastic to the door frame. Check whether window is operating correctly or not before you replace or fix the door panel. You can add a quality lubricant for working smoothly to the moving parts of the track.

• Tracks: When the tracks were broken the window can stuck. It is also occurred when opening forcefully during the freezing conditions. Remove the door panel manually and check the track whether the window seated correctly or not. We can break the small plastic components which are causing for system malfunction on the windows track. Replacing of the broken plastic components is not a difficult. These can be available at auto supply stores.

• Buttons: Test the button with the multimeter. Check both the driver control and the individual control window buttons. If it is not working, you can replace them. These can be available in many places and the cost is also less.

You should need to troubleshoot the problem. If you find exactly it will be easy to repair. Be careful while you need to break anything like plastics, the pressure may lead to the glasses.